Home » Sandstone Pavers » Melbourne Teakwood Sandstone Pavers, Tiles, Paving, Pool Coping 2
Interior
Exterior
Pool Surround
Pool Coping
Driveways
Patio
Paths
General Comments
Melbourne Moroccan Sands Teakwood Sandstone Pavers, Tiles, Paving, Pool Coping and Crazy Paving.
These natural sandstone pavers and natural sandstone tiles have a smooth flat non-slip surface.
Natural Sandstone Pavers and Natural Sandstone Tiles available in: 500x500mm, 600x300mm and 600x400mm (all stocked). Other sizes available by request.
We recommend the following guidelines be followed with each paving application:
* 17mm Teakwood Sandstone pavers should either be layed onto an existing concrete slab OR can be layed into a crushed rock prepared base into a wet mix of sand and cement.
* 30mm Teakwood Sandstone pavers make great coping tiles and step treads or can be layed AS ABOVE or simply on a prepared sand bed.
We deliver sandstone pavers, tiles and pool coping door to door to all suburbs in Melbourne, Sydney, Canberra, Brisbane, Adelaide and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.
SALE PRICE: $36m2 in 600x300x17mm
Suitability:
Sealing:
Teakwood Sandstone pavers and tiles can be sealed with an invisible penetrating sealer to assist in the ongoing maintenance of the sandstone paving.
An invisible penetrating sealer can be applied prior to grouting which will facilitate easy clean up after application of the grout for all do it yourselfers.
Cleaning:
Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react.
Maintenance:
Just sweep when needed. Teakwood Sandstone responds well to high pressure cleaning. A solution of mild detergent and water, can be applied prior to pressure cleaning. Teakwood Sandstone pavers and tiles should be resealed every 12 months or follow the sealer manufacturers guidelines. When used as pool coping tiles Teakwood Sandstone should be resealed every 6 months.
Product | Size | Thickness | Edge | Retail | Special |
---|---|---|---|---|---|
![]() |
600x300mm | 17mm | Sawn Edge | $39.00 / m2 | |
![]() |
500x500mm | 17mm | Sawn Edge | $40.00 / m2 | |
![]() |
500x500mm | 30mm | Sawn Edge | $65.00 / m2 | N/A |
![]() |
600x400mm | 30mm | Sawn Edge | $65.00 / m2 | N/A |
![]() |
500x500mm | 30mm | Bullnose Edge | $26.00 / ea | N/A |
![]() |
600x400mm | 30mm | Bullnose Edge | $28.00 / ea | N/A |
![]() |
600x350mm | 40/20mm | Drop Face Edge | $38.00 / ea | N/A |