👑 We are closed for Kings Birthday (10th June). Back Open On the 11th. 👑

12 Princes Highway Doveton, vic 3177 

mon – fri: 7:30 am – 5:00 pm * sat: 9:00 am – 4:00 pm

Ebony Ledgestone Wall Cladding



Shipping cost to your door

Estimated shipping cost to your door

Estimated shipping cost to depot

Discounted Price
Sales Price

total price
Enter your postcode above to see shipping cost
Total Price
incl. GST


Not ready to buy your stone pavers or tiles just yet? No worries! We know choosing the perfect material takes time. That’s why we’re offering you a chance to experience their beauty with our FREE sample.


from $139.70 /m2

100 % Natural Stone | Safe non Slip surface  | Great Indoors & Outdoors | Easy to install (no need for a tiler)


  • Natural Stone
  • Great Indoors & Outdoors
  • Easy to install (no need for a tiler)


  • Interior Walls
  • Exterior Walls
  • Fire Places
  • Corner Pieces
  • Water Features

About Ebony & Rust Ledgestone Wall Cladding:

Ebony Bluestone Extra Rustic from our famous “Ledgestone Stacked Stone Series”

Natural Stone with a natural cleft finish mounted on cement for ease of installation. Yes we have matching natural corners to make the job even easier to install.

Stone Panel Dimensions:
600x200x30-40mm Panels
300x200x30-40mm Corner Pieces



Stack stone cladding can be sealed with an invisible penetrating sealer to assist in the ongoing maintenance of the stone cladding.


Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react.


Stack stone cladding responds well to high pressure cleaning. A solution of mild detergent and water, can be applied prior to pressure cleaning.


Great for indoors and outdoor applications such as: stone retaining walls, indoor feature walls, ponds and outdoor wall cladding.

Installation Guide

Prior to installing your stone cladding, it is important to decide whether waterproofing is required on your substrate. All wall boarding joins and screw holes should be sealed properly. If in doubt, consult your nearest board manufacturer. We recommend masonry substrates for natural split stone due to weight.

Ensure to leave a expansion joints between abutting surfaces eg start 10mm off floor. These can be soft filled with colour matched caulking at the end of the install.

Start your Corners first, alternating the long and short returns as you work upwards.

Be sure to keep the work roughly level as you go for stacked stone. Snap a chalk line or use a spirit level to check every few rows. Sometimes it maybe necessary to trim a little bit of excess cement off the edge of the tile to keep them approximately level as you must not use spaces like you do with ceramic tiling.

Use a trowel edge, nipper or other sharp, blunt tool to trim stones if necessary. For straight cuts, use a grinder with a diamond or masonry blade. If your stone panels interlock, w recommend when cutting the stone to repeat the interlocking cut DO NOT simply cut a vertical line as it doesn’t look great at the end.

Conceal trimmed edges with grouting where applicable, or hide them by turning the cut side upward above eye level or downward below eye level.

When installing in a dry, hot climate or onto extremely dry surfaces, be sure to wet the stone and the wall first so they do not absorb moisture from adhesive. You can spray or otherwise apply water onto the back of the stone or dip it into water. Spray or brush water onto the wall as well. Allow both to dry a few minutes to remove excess water.

For Adhesives, if using Mapei Keraflex pre-mix Adhesive (or Equivalent), ensure to wipe off excess from face of stone immediately with a Wet Sponge otherwise it may be difficult to clean off when dry.

For Grouting, if Mapei Keracolour GG Grout (or Equivalent) is used and accidentally gets on the face of stone during installation, do not wipe it off. It will smear and discolour the stone. Instead, let it set until ‘touch dry’ – typically around 20-40 minutes dependent on weather, then brush it away with a dry heavy duty bristle broom.

Avoid water runoff onto your installation. Divert water away with flashing.

Local building codes vary. Be sure to check the requirements in your area.

Lay out the stone near your work area first. As you install, choose stone that vary in colour tones, shape and size for best result.

Apply the adhesive to the wall and the back of the tile using a 10mm notched V trowel. Typically 10-15mm thick adhesive bed to the back of the stone, then rub the stone against your substrate is a gentle back-and-forth motion until the adhesive squeezes out around the edges. As a guide, a minimum 5-6mm final adhesive bed is ok. Check with adhesive manufacturer if in doubt.


There are no reviews yet.

Be the first to review “Ebony Ledgestone Wall Cladding”
David W.
Newcastle, NSW
Read More
Even though Im in Newcastle the customer service from Melbourne was better than anyone else. The free sample was excellent. The european bluestone was cheap but looks very expensive!!
Brienne C.
Townsville, QLD
Read More
Thanks heaps to Steve for help with designing my fireplace wall. The stackstone looks great ive gotten so many compliments. Love it so much were putting it also as an outside feature wall.
Stavros K.
Mentone, VIC
Read More
BIG thank you to the team at Stone & Slate Discounts. Ive looked at other tile shops for outdoor tiles but your customer service and prices were the best by far.
Lynn H.
Brisbane, QLD
Read More
The free sample service is excellent!! Helped made our decision so much easier. Have since tiled our pool with ivory travertine. Very impressive. ***** Stars
Ben G.
Black Rock, VIC
Read More
Excellent value for money. We're very happy with the way our pool looks with the blue stone pavers. Its become the pride of our home. Have recommended you to our friends and family.

Customer Also Viewed

You may also like…

cheapest stone pavers
Australia's Cheapest Stone Tiles & Pavers
happy customers
360,000+ Happy
australia wide delivery
Fast & Easy
Nationwide Delivery
free express posted sample
FREE Express
Posted Samples
image 13
Australia’s Cheapest
Stone Tiles & Pavers
360,000+ HAPPY

Fast & Easy
Nationwide Delivery

image 16

FREE Express
Posted Samples

CALL: 03 9706 9767

Our friendly Stone Paver Experts are here to help you get the best paving solution for your project!

We’re available: Mon – Fri 7.30am – 5pm & Sat 9am – 4pm.
After hours please contact us here.